Buel® H
The BUEL® Model H is a family member of the DELLNER BUBENZER brand BUEL®. BUEL® thrusters are used for almost all kind of industrial applications. They are setting new industry standards for disk and drum brakes as well as wheel brakes.
- New technology
- Pressure generation by centrifugal gear pump with high mechanical efficiency
- Fast setting times
- Energy saving by intermittent duty
- Fail safe principle
- Redundant valves
- Compact dimensions
- Terminal box with control board
- Automatic pressure drop compensation
- Low heat generation
- Huge temperature range in standard execution
- Little oil volume
- Little ecologic risk
- High protection category
- Infinitely variable setting time
- Swivel head for shear force and misalignment compensation
- Unique design for the complete model range
- Low weight, excellent mass/performance ratio
Electrical design All BUEL® thrusters are operated with 3-phase voltages between 220 V to 690 V @ 50 Hz or 60 Hz.
Protection class All electric components of the BUEL® thrusters are located inside, for best protection against environmental influences. BUEL® thrusters are rated IP 65. As an option, protection class IP 67 is possible.
Operating modes (BL 35-5 to BL 600-8) BUEL® thrusters are designed for intermittent duty, independently from the required operating mode of the drive installed. Any limitation of the duty cycle is not required. After reaching the end position (brake released) the motor is switching off. In case the end position is not reached within 4 seconds, the motor is switched off internally.
Ambient temperature range BUEL® thrusters are suitable for ambient temperatures between -30°C to +60°C. For deviating ambient temperatures, please contact us for support.
Protection against moisture For applications in maritime or tropic environments, the optional use of a small heater to protect the motor windings from moisture is recommended.
Heater voltages can be:
- 110 to 120 V AC 50 Hz or 60 Hz
- 220 to 240 V AC 50 Hz or 60 Hz
Hydraulic media BUEL® Model H thrusters are filled with a high performance synthetic oil, type Fuchs Titan CHF 11S. This oil insures a trouble-free operation in the entire temperature range, indicated above. Biodegradable oil is available as an option.
Installation positions All BUEL® thrusters are preferably operated vertically (piston rod ontop). A deviation of +/- 30° from the vertical axis is permitted. A horizontal installation is possible as an option (please indicate with the order).
Additional PRODUCTS
- All
- Caliper / Disc Brakes
- Components & Accessories
- Couplings
- Drum & Band Brakes
- Hydraulic Systems
- Locking Devices
- Monitoring & Control Systems
- Motor Mounted Brakes
- Pneumatic Drum Clutches & Brakes
- Stop Turn Lock Systems
- Storm Brakes (Rail & Wheel Brakes)
- Thruster / BUEL®
- Wind Turbine Components
- WPT Disc Clutches & Brakes
Supported by decades of engineering, evolution, and innovation, the SB 28.5 brake presents significant advantages with an enhanced and compact design, sustainability, and preeminent performance.
The SB 30 is the most powerful service brake in this series. It is dimensioned for large hoists and for BOSS applications. Furthermore, automatic adjustment, self-centering, jaw parallel adjustment are part of the standard equipment.
The SB 8 series covers a large part of the versatile industrial applications. It is often used in hoists where installation space is limited and can be equipped with a wide range of options.
The SBS system consist of a spring applied, hydraulically released SKP model disc brake and the hydraulic brake release pressure is generated from a Hydraulic Power Pack – all incorporated on a bracket. The SBS is typically used on stacker cranes (bolted to crane structure) and the brake is acting directly on the crane travel railhead. The system communicate with the crane control system and can stop the crane wherever in the aisle in an emergency situation.
The high capacity of the SF-series makes them particularly suitable as secondary emergency brakes on hoist gears and on downhill conveyors.
The high capacity of the SF-series makes them particularly suitable as secondary emergency brakes on hoist gears and on downhill conveyor.
For many years a seawaterproof version of the SFB series has been used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.
DELLNER BUBENZER's model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units.
DELLNER BUBENZER's model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units.
DELLNER BUBENZER's model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units.
DELLNER BUBENZER's model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units.
DELLNER BUBENZER's model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units.
DELLNER BUBENZER's model SKDe disc brakes are direct acting electric applied, spring released units.
DELLNER BUBENZER's model SKDe disc brakes are direct acting electric applied, spring released units. The braking force achieved is directly proportional to the applied pressure.
The SKP model disc brake is a spring applied, hydraulically released brake which offers a reliable and safe of method of braking linear or rotary motion.
With a single acting (SA) brake, braking force is generated in one half of the brake and the other half slides towards it using a robust, low friction system, enabling self-alignment and making it ideal for small spaces and applications with axial movement.
The SKP model disc brake is a spring applied, hydraulically released brake which offers a reliable and safe of method of braking linear or rotary motion.
The SKP model disc brake is a spring applied, hydraulically released brake which offers a reliable and safe of method of braking linear or rotary motion.